How to configure Kerio Operator to connect to ActiveNetwork
NOTE
This information is designed for Kerio Operator 2.4 and newer.
Learn how to configure connect Kerio Operator to Active Network using either a SIPSession Initiation Protocol - A communication protocol used for voice and video calls in Internet telephony or private IP telephone systems. truck also known as postpagato or, using account prepagato.
Prerequisites
Before configuring Kerio Operator, you will require the following information:
- Telephone number, as provided by Active Network in the Area Riservata on their website.
- User-name of the SIP account.
- Password
- SIP Domain
- The SIP account type -
postpagatoorprepagato. - If you have a firewall, make sure the SIP and RTP ports are open and properly routed to Kerio Operator.
Configuration
This process describes how to connect Kerio Operator to a SIP account with Active Network.
- Log in to the administration interface of your Kerio Operator and navigate to the Call Routing screen.
- Click Add a SIP Interface.
- Enter a description for the interface name. For example,
activenetwork-prepagato). - Choose the option New provider and enter your telephone number.
- With the option
postpagato, it is necessary have the number 5 in front of the phone number. For example, 507611878139. - With the option
prepagato, the phone number doesn’t have any prefixCountry codes, area codes, a number, or a set of numbers that are dialed before the telephone numbers. in front of the number. For example, 07611763399.
- Click Next.
- Choose the extension to receive incoming calls and enter the prefix that will be used to dial out.
- Click Next.
- Enter the Domain (IP address/hostname).
- For an account
prepagatouse VOIP.EUTELIA.IT. - For an account
postpagatouse SIP.TWT.IT.
- Enter your Active Network User Name as the username and the SIP-Password as the password.
- Ensure Required to register is checked.
- Click Next to continue to the Summary screen.
- Verify the information and click Finish.