1-888-77-Kerio
Home » Categories » Kerio Operator » Server configuration - Kerio Operator
Icon Printer Icon Email      Icon Twitter Icon Digg Icon Stumbleupon Icon de.icio.us Icon FaceBook

Configuring parameter 66 in DHCP server in Kerio Control

What is parameter 66 in a DHCP server?

The DHCP protocol assigns IP addresses. Apart from these addresses you can also send additional parameters via the DHCP protocol. Parameter 66 configures the TFTP server address.

How to set parameter 66 in Kerio Control

  1. In the administration interface, go to section DHCP server.

  2. If you use the automatically generated scopes, use Click to configure scopes manually.

  3. Select a scope and open its settings (the Edit Scope dialog).

  4. Click on the Add button.

  5. Add parameter 66.

  6. Enter a public IP address through which Kerio Operator communicates.


comments powered by Disqus