1-888-77-Kerio
Category Articles RSS Feed
Hardware telephone basic usage
Added on Fri, Oct 19, 2012
General information This article includes information on how to use common functions of hardware phones (supported by Kerio Technologies). Using loud speaker Every telephone has a special button for loud speaker (speaker button). You ca... Read More
Configuring Snom M300/M700 with Kerio Operator
Added on Fri, Aug 7, 2015
OverviewNew in Kerio Operator 2.4 Snom M300/M700 is a SIP-to-DECT base station working with M-series wireless handsets.Kerio Operator provisions Snom M300 and M700 base stations, but you must register handsets and assign internal extensions to them ... Read More
Configuring Cisco / Linksys SPA phones to support more than three callers in a conference
Added on Fri, Dec 6, 2013
Summary The Cisco / Linksys SPA phone models support 3-way calling, which allows up to three callers in a conference. In some cases, you may require more than three callers. In this scenario, administrators can configure conferences. To further simpl... Read More
Configuring the Aastra 6755i IP Phone with Kerio Operator
Added on Wed, Aug 21, 2013
Summary This article covers the basic configuration and usage of an Aastra 6755i IP phone with Kerio Operator.As of Kerio Operator version 2.3, this phone model can be automatically provisioned. Refer to the system requirements for a comple... Read More
Configuring BLF on Polycom phones
Added on Tue, Dec 4, 2012
BLF on Polycom overview BLF (Busy Lamp Field) is a light placed on a telephone device. BLF notifies you if another extension is busy or not. Setting BLF on Polycom telephones is not as easy as on other telephones. You need to prepare a confi... Read More
How to configure Busy Lamp Field (BLF) on Cisco SPA500S
Added on Tue, Jan 24, 2012
SummaryBusy Lamp Field (BLF) feature allows users to monitor several other extensions. Sometimes, the term "Direct Station Selection” is used for the same functionality. State of the monitored extensions is usually indicated by a series of LED lights... Read More
How to configure Busy Lamp Field (BLF) on snom phones
Added on Mon, Nov 7, 2011
SummaryBusy Lamp field (BLF) feature allows users to monitor several other extensions. Sometimes the term "Direct Station Selection” is used for the same functionality. State of the monitored extensions is usually indicated by a series of LED lights ... Read More
Linksys/Cisco SPA: Setting the TFTP address without using the DHCP parameter 66
Added on Thu, Mar 15, 2012
Who should read this article You want to use phoneprovisioning. Your DHCP server does not support parameter 66. You use the Linksys/Cisco SPA phone. Setting the TFTP address without using the DHCP parameter 66 forLinksys SPA942 In a... Read More
How to configure Busy Lamp Field (BLF) on Well phones
Added on Mon, Nov 7, 2011
SummaryBusy Lamp field (BLF) feature allows users to monitor several other extensions. Sometimes the term "Direct Station Selection” is used for the same functionality. State of the monitored extensions is usually indicated by a series of LED lights ... Read More